Requirements for Tartel Novohit Tartel Tarifier

Requirements for Tartel Novohit Tartel Tarifier

Requirements for Configuring the Interface between the Call Switch and Tartel

Via Ticket, send Novohit the following information which can be obtained from your PBX equipment provider.

  1. Switcher's Mark
  2. A plain text file (.txt) with the communication parameters (data stream) with which the CDR is sending (call log).
  3. A text file (.txt.) with some sample calls (trace or log of the last PBX calls).
  4. The type of TCP-IP or Serial connection.
  5. Rates paid to the telephone company (cost according to the rate paid to the telephone company).
  6. Extension numbers, in the case of administrative extensions the name and their cost center (area).
  7. Authorization code numbers (if applicable).
  8. Comparative table of Equivalence between room numbers and extension numbers, indicating if they are the same or how they differ.
  9. Table with special Tariffs, (800, 888, "no cost", Carriers, abbreviated dialing, etc).
  10. IP of the PC of the dialer. (see note).
  11. In case the Switch is with serial port connectivity, send: speed, character length, parity, stopbit.
  12. In case the Switch is with Network connectivity, send the local IP address and the port on which the switch listens.
  13. Download TeamViewer from this link: https://get.teamviewer.com/novohit and send TeamViewer ID and password.
  14. Table with the costs you want to charge to Guests for:
    1. National Calls
    2. International calls
    3. Local Calls
    4. Collect Calls
    5. Cellular Calls

Requirements to Install Tartel Tarificador

To install the Tartel call accounting/tariffer, the following is required:
  1. a dedicated PC with the following specifications: Standard Workstations Computer Equipment Requirements PC Mac Mobile
  2. The PC must be connected to the same network as the novohit server, with fixed local IP or with VPN set by Novohit.
  3. The PC must be connected to the switch port (serial or TCP-IP/network, depending on the switch).
  4. It is recommended that it is physically located in the server room.